![]() ![]() Colour Coded Microphone ChannelsĮach microphone channel on the RØDECaster Pro now has its own dedicated colour, which remains on the sidebar as you cycle through the menus. Make sure you allocate the main USB device to your communications app, and Source 1 and 2 of the multitrack USB device to your recording software. This means if you want to record the stereo mix to your computer as well as use the USB input for a phone call or similar, you will need to activate multitrack mode. This is also activated via the ‘Advanced’ menu.Īn important note to remember: if you activate mix-minus mode on the USB output, the main USB output no longer represents the full podcast mix. This means if you want to connect a computer-based communication app like Discord or Skype via the USB channel, you can do so without a feedback loop. ![]() ![]() ![]() The RØDECaster Pro now has switchable mix-minus on the USB channel, in addition to the mix-minus on the Bluetooth and TRRS channels. If this mode is activated, the on-board processing will still output to the main stereo mix. This is ideal if you want to add all of your processing in post-production. However, you can choose to bypass this processing, giving you the raw channel output of each track instead. Switching Multi-Channel Outputs Between Pre and Post Audio Processingīy default, each of the tracks output in multitrack mode will include any audio processing you have selected while recording, such as the on-board APHEX processers or compression. The process for accessing and allocating tracks in a DAW will vary between platforms and software, but in general you need to select the multitrack USB device in your preferences and select the individual source on a per-track basis. The mic channels are single mono tracks, and all the other tracks are stereo – first left, then right. The remaining tracks represent the sources on the RØDECaster Pro, going from left to right across the console – starting with Mic 1 and going across through Mics 2, 3 and 4, the USB input, TRRS phone connector, Bluetooth input, and finally the sound pads. The first two tracks are the stereo mix, exactly as the RØDECaster Pro records to the microSD card. This additional USB device has 14 different sources available. Once activated, an additional RØDECaster Pro USB output device will appear on your computer, in addition to the regular stereo USB output.(Note that when you activate this mode you may have to disconnect and then reconnect the USB connection to your computer for your computer to recognise the additional USB device – the RØDECaster Pro will prompt you to do this if necessary). Multitrack-to-USB is activated via the RØDECaster Pro’s ‘Advanced’ settings. Multitrack mode (called ‘multi-channel’ mode on the RØDECaster) allows you to record not only the stereo mix of your podcast, as was previously the case with the RØDECaster, but also each individual track, meaning you can now mix your podcast in post-production. See below for a full rundown of the update. Update 1.1.0 introduces a stack of new features to the RØDECaster Pro, including the much-anticipated multitrack functionality, as well as an updated user interface and mix-minus on the USB output. We are thrilled to announce the first major firmware update for the RØDECaster Pro Podcast Production Studio has arrived. RØDECaster Pro Multitrack - How It Works (And More Features From Update 1.1.0 Explained) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |